Search

Lion News

Showing posts for tag: worker safety

Railcar Servicer Fined $550K After Worker Fatality

1/6/2020

Railcar Servicer Fined $550K After Worker Fatality

On December 4, OSHA fined a railcar company $551,226 due to confined space safety violations that led to the death of an employee in Pittston, Pennsylvania.
Meat Plant Fined $50K by OSHA Following Death of Worker

10/29/2019

Meat Plant Fined $50K by OSHA Following Death of Worker

A Pennsylvania meat processing plant has been fined $49,062 in safety violations after an employee was killed as a result of falling or being pulled into a commercial meat grinder.
OSHA Approves 2 Additional Respirator Fit Test Protocols

10/21/2019

OSHA Approves 2 Additional Respirator Fit Test Protocols

Last month, OSHA approved two additional respirator fit testing protocols for inclusion in its Respiratory Protection Standard at 29 CFR 1910.134, Appendix A.
New from CSB: Engage Workers to Prevent Chemical Incidents

9/10/2019

New from CSB: Engage Workers to Prevent Chemical Incidents

The US Chemical Safety Board (CSB) released a new safety digest on September 4, 2019 that addresses the importance of work participation to prevent chemical incidents.
 
OSHA Cracks Down on Lockout Procedures Across Industries

5/13/2019

OSHA Cracks Down on Lockout Procedures Across Industries

Let’s review two recent OSHA citations that involved lockout/tagout violations to see how these procedures can save lives at any facility where employees maintain or service machinery. 
OSHA Seeks Industry Input on Forklift Safety Standard

3/12/2019

OSHA Seeks Industry Input on Forklift Safety Standard

In a Request for Information (RFI) published to the Federal Register on March 11, the Occupational Safety and Health Administration requests information and comments about the requirements for forklifts and other trucks under the general industry, maritime, and construction Standards.
 
OSHA Extends Beryllium Compliance Dates for Certain General Industry Ancillary Provisions

8/10/2018

OSHA Extends Beryllium Compliance Dates for Certain General Industry Ancillary Provisions

OSHA has published a Final Rule to extend the compliance dates for “certain ancillary requirements” of its beryllium exposure worker protections issued in January 2017. The compliance deadline for ancillary provisions—including requirements for personal protective equipment and clothing, hazard communication, and recordkeeping—is now December 12, 2018.
 
OSHA Releases Employer Guidance in Advance of Safe + Sound Week

7/20/2018

OSHA Releases Employer Guidance in Advance of Safe + Sound Week

Safe + Sound Week takes place from August 13–19 this year. The event is a combined effort of OSHA and safety organizations, including the American Industrial Hygiene Association (AIHA), American Society of Safety Professionals (ASSP), National Institute for Occupational Safety and Health (NIOSH), and the National Safety Council (NSC).
 
OSHA Clarifies New Beryllium Exposure Standard with Direct Final Rule

5/7/2018

OSHA Clarifies New Beryllium Exposure Standard with Direct Final Rule

OSHA published a Direct Final Rule in the Federal Register on May 7, 2018 to make clarifying amendments to its new beryllium exposure worker protections finalized in January 2017.
 

Find a Post

Recent Posts

Compliance Topics

Compliance Archives

Lion - Quotes

I have over 26 years of environmental compliance experience, and it has been some time since I have attended an environmental regulations workshop. I attended this course as preparation for EHS Audits for my six plants, and it was exactly what I was looking for.

Frank Sizemore

Director of Regulatory Affairs

The instructor clearly enjoys his job and transmits that enthusiasm. He made a dry subject very interesting and fun.

Teresa Arellanes

EHS Manager

If I need thorough training or updating, I always use Lion. Lion is always the best in both instruction and materials.

Bryce Parker

EHS Manager

The exercises in the DOT hazardous materials management course are especially helpful in evaluating your understanding of course information.

Morgan Bliss

Principal Industrial Hygienist

I was recently offered an opportunity to take my training through another company, but I politely declined. I only attend Lion Technology workshops.

Stephanie Gilliam

Material Production/Logistics Manager

I like Lion's workshops the best because they really dig into the information you need to have when you leave the workshop.

Tom Bush, Jr.

EHS Manager

This is a very informative training compared to others. It covers everything I expect to learn and even a lot of new things.

Quatama Jackson

Waste Management Professional

I have attended other training providers, but Lion is best. Lion is king of the hazmat jungle!!!

Henry Watkins

Hazardous Waste Technician

The instructor made the class enjoyable. He presented in a very knowledgeable, personable manner. Best class I've ever attended. Will take one again.

John Nekoloff

Environmental Compliance Manager

Energetic/enthusiastic! Made training enjoyable, understandable and fun!

Amanda Walsh

Hazardous Waste Professional

Download Our Latest Whitepaper

Some limited quantity reliefs are reserved for specific modes of transport. Use this guide to identify which reliefs you can capitalize on, and which do not apply to your operations.

Download
Latest Whitepaper

By submitting your phone number, you agree to receive recurring marketing and training text messages. Consent to receive text messages is not required for any purchases. Text STOP at any time to cancel. Message and data rates may apply. View our Terms & Conditions and Privacy Policy.