Lion News
7/20/2011
Miscellaneous Amendments to Hazmat Regulations
On July 20, 2011, at 76 FR 43510 the Pipeline and Hazardous Materials Safety Administration (PHMSA) amended the Hazardous Material Regulations (HMR) to make miscellaneous amendments to update and clarify certain regulatory requirements.
These amendments were based on petitions from the regulated community and PHMSA’s own initiative. The amendments are intended to update, clarify, or provide...
7/19/2011
Question of the Week: DOT Rules for Reusing Drums for Shipping Hazardous Waste
Q. As a small manufacturer, we buy lots of chemicals each month to use as solvents, purifiers, or catalysts. When we’re done, we ship the used chemicals back to the supplier for recycling and, in many cases, eventual reuse.
Most of the time, when we return-ship this hazardous waste, we refill the waste material into the...
7/12/2011
Question of the Week: PCB Waste Management
Q. We are doing some building maintenance and have removed or replaced a number of our fluorescent lighting fixtures. As a result, we have an assortment of lighting ballasts. I know that polychlorinated biphenyls (PCBs) are regulated under TSCA and not RCRA. Can I presume that our lighting ballasts contain less than 50 ppm PCBs? If not....7/12/2011
The Spring 2011 Regulatory Agenda: OSHA
On July 7, 2011, Federal regulatory agencies published their semiannual regulatory agendas and regulatory plans as required under the Regulatory Flexibility Act [5 U.S.C. 602]. The agenda is where agencies summarize all current or projected rulemakings and review existing regulations and completed actions. While the detailed agendas are no longer published in the Federal Register...7/11/2011
The Spring 2011 Regulatory Agenda: EPA
On July 7, 2011, Federal regulatory agencies published their semiannual regulatory agendas and regulatory plans as required under the Regulatory Flexibility Act [5 U.S.C. 602]. The agenda is where agencies summarize all current or projected rulemakings and review existing regulations and completed actions. While the detailed agendas are no longer published in the Federal Register....7/8/2011
The Spring 2011 Regulatory Agenda: PHMSA
On July 7, 2011, Federal regulatory agencies published their semiannual regulatory agendas and regulatory plans as required under the Regulatory Flexibility Act [5 U.S.C. 602]. The agenda is where agencies summarize all current or projected rulemakings and review existing regulations and completed actions. While the detailed agendas are no longer published in the Federal Register...7/6/2011
EPA Proposes Modifications to 2008 Definition of Solid Waste Rule
Today, the U.S. Environmental Protection Agency announced a proposed rule to modify the 2008 Definition of Solid Waste (DSW) rule. The DSW rule had been intended to promote recycling of “hazardous secondary materials.” The EPA’s proposed modifications are in response to concerns raised by the Sierra Club and other environmental groups through various court actions...7/6/2011
US DOT Requires Training for Shippers of Dry Ice
Dry ice is commonly used by the medical, pharmaceutical, and food industries to keep perishable goods frozen during shipment. The substance poses a variety of health and safety threats, including explosion and suffocation. With enforcement on the rise, thorough knowledge of the regulations is essential to avoid penalties for non-compliance that can be as high as...7/5/2011
Question of the Week: Storing Sharps
Q. We generate contaminated sharps at several locations in our facility. We are currently using a large plastic pail that is centrally located in the building to collect all of these sharps, but I’ve been told that we can’t do that. What kinds of containers do we have to use and where are we supposed to place them? Also, where are we supposed to send them when they are full...6/30/2011
Question of the Week: Classifying Aerosol Can Waste
Q. Are aerosol cans considered to be a D003 simply because they are pressurized?
A. When it comes to waste identification, it is the responsibility of the generator to make a waste determination based on all aspects of the material (40 CFR 262.11). RCRA programs in some authorized states simplify your waste classification process and declare that each and every aerosol can...
Download Our Latest Whitepaper
Explore ten hazardous waste management errors that caused generators in California the most trouble last year.
By submitting your phone number, you agree to receive recurring marketing and training text messages. Consent to receive text messages is not required for any purchases. Text STOP at any time to cancel. Message and data rates may apply. View our Terms & Conditions and Privacy Policy.